|
AC Drives
DC Drives
Servo Drives
-890
-638
-635
-637F
-DLD Series
-DSD Series
-DPD Series
-RTS Series
Servo Motors
HMI Touch Screens
Communications
Packaged Drives
Systems Solutions
Product Manuals
For more information, contact us at:
Parker Hannifin Corp.
SSD Drives Division
9225 Forsyth Park Dr.
Charlotte, NC 28273
Phone: (704)588-3246
For more information, contact us at:
Click here for
SSD Drives
contact information
|
|
Digital Brushless Servo Drives
From 1 to 15 Ampere |
| Description
The 638 series is
suited to applications from simple speed regulation to the more complex
requirements for current and position control.
A new processor in the 638 provides control loop response time of 105
microseconds. Expansion slots allow 638 series servo drives to reach
a high degree of versatility, opening access to a wide variety of fieldbus
communication and feedback sensors options.
| |
 Integrated motion controller
230 or 400 VAC direct power supply
EN954-1 category 3 safety input
Ultra-fast control loops (105us)
Embedded PLC functions
Programmable
electronic cam
3
configurable trajectory generators
Multi-axis
synchronization through process bus
Numerous
fieldbus options
Hiperface
and SSI encoder inputs options
Optional
flash memory chip for data storage
Simple
commissioning and programming software
|
| |
| |
AVAILABLE OPTIONS
Cables and connectors
Flash memory - X300 module
Storage of complete drive data (firmware, function code, parameters, applications
program)
I/O Expansion
5 digital inputs / 2 digital outputs
(COM2 interface)
14 digital inputs / 10 digital outputs (X200 plug)
4 digital inputs / 4 digital outputs (X120 plug) |
|
|
TECHNICAL SPECIFICATIONS
Supply Power
230 VAC Single/Three-phase (+/-10%)
- 50/60 Hz
400/480 VAC Three-phase (+/-10%) - 50/60 Hz
Control Supply
24 VDC
Overload
200% for 5 seconds
Ambient Temperature
0-40°C - 2% derating per degree C to 50°C max
Humidity
< 85% relative humidity non-condensing
Altitude
1000 m (1% derating per 100m up to 4000 m)
Degree of Protection IP20 |
| |
|
INPUTS/OUTPUTS
X10
Connector - Inputs/Outputs
8 digital inputs (24V) including 2 interrupts
5 digital outputs (24V) including 3 opto-coupled (configurable)
2 analog inputs (0-10V, +/-10 V)
2 analog outputs (+/-10V)
X30
Connector - feedback interface
Resolver input (standard)
Hiperface encoder input (option)
Sin/Cos encoder input (option)
X40 Plug - Configurable interface
Incremental encoder input
Incremental encoder output
Stepper motor input
Absolute single or multi-turn SSI encoder input
COM1 interface
RS232 serial
COM2
interface
Profibus-DP
DeviceNet
CANopen DS402
RS232
RS422
RS485
SUCOnet K
Interbus S
COM3
interface - inter-axis communications
CANopen
CANopen / RS485
Interbus S
Safety
Safe stop input EN954-1 category 3 (STO X11 plug)
Brake / PTC output (BR/TH X62 plug)
|
|
|
INTERNATIONAL STANDARDS
The
638 series complies with the following standards when installed
in accordance to installation manual.
EN50178
(Safety, low voltage)
EN61800-3
(EMC compliance) with integral filter
CE,
UL and c-UL marks |
| |
|
| |
Click
here for Catalog Data (PDF 82k)
Click
here for User Manual (PDF 2.6Mb) |
© Copyright 1999-2012 Parker Hannifin Corporation
All rights reserved. Legal Information. Privacy Statement.
|
