|
AC Drives
DC Drives
-590
-514
-512
-506/507/508
Servo Drives
Servo Motors
HMI Touch Screens
Communications
Packaged Drives
Systems Solutions
Product Manuals
For more information, contact us at:
SSD Drives
9225 Forsyth Park Drive Charlotte, NC 28273
Phone: (704)588-3246
Click here for
SSD Drives
contact information
 |
|
514C Regen Digital Drives
from 4 to 32 Ampere ( up to 7.5 Hp)
|
| Description
The regenerative 514C DC drive offers full four-quadrant control of DC motors from single
phase supplies. As such it is ideal for applications involving overhauling loads
or where rapid and accurate deceleration is required.
Together with the non-regenerative
512C, they offer the perfect solution for lower power single motor and multi-drive
applications.
| |
Isolated input Circuitry
Multiple inputs for reference speed/current
Integrated pilot relay for main contactor
Integrated Field Supply
Extremely linear control loops
|
|
|
|
OPTIONS
EMC filter
Line reactors for European and
North American markets (UL-CSA) |
|
|
|
POTENTIOMETERS
Maximum speed
Minimum speed
Current limit
Acceleration rate (1-40s)
Deceleration rate (1-40s)
Current Proportional Gain
Current integral Gain
Speed Proportional Gain
Speed Integral gain
I.R. Compensation
Zero Speed Threshold
Zero speed offset |
|
|
|
SWITCH SELECTIONS
Speed Calibration
Tachometer/Armature Voltage Feedback Select
At zero speed
Output current bipolar/unipolar
Ramp isolate
Stall logic On/Off
Current reference input/output
Over-current trip
Set-point comparator |
|
| |
TECHICAL SPECIFICATIONS
Switch Selectable Supply Power
Single Phase 110Vac ±10%
Single Phase 220Vac ±10%
Single Phase 380Vac ±10%
Single Phase 480Vac ±10%
50-60Hz ±5%
Ambient
Temperature
0-40°C |
|
|
TECHNICAL CHARACTERISTICS
Motor
Protection
Stall condition 15 seconds internal
Electronic Overload Protection
Overload
150% for 60 seconds
Available
Field Current
Up to 3A D.C.
Available Frame Sizes
4, 8, 16 and 32 ampere |
|
|
INPUTS/OUTPUTS
Analogue
Inputs
Ramp input
Reference input - positive
Reference input - negative
Tachometer feedback
Current limit
Current reference
Minimum speed
Thermistor input
Analogue
Outputs
Speed
Load
Current reference
Ramp output
Total reference
Total reference inverted
Reference supplies ±10V DC and +24VDC
Digital
Inputs
Run (Active)
Stall enable
Digital
Outputs
Zero speed
At stall condition
Healthy |
|
|
INTERNATIONAL CODE
The
514C series drive complies with UL508C and complies to standard
code when installed in accordance to manufacturers installation
manual.
EN50178
(Protection Low Voltage Directive)
EN50081-1
(1992)
(Emission in ambient EMC)
EN50082-2
(1995)
(Immune in industrial EMC environment)
Complies
with CE, UL e c-UL |
|
|
|
Click
here for "506/507/508/512C/514C Series DC Drives" PDF (74k)
|
© Copyright 1999-2008 Parker SSD Drives.
All rights reserved. Legal Information. Privacy Statement.
|
