| Index of Accessories
below:
Highlights
Plastic Fiber Optic Cable
SSD Drives flexible acrylic fiber optic cable has a minimum bending
radius of 1.5 inches. Terminations are made simply by snapping
together the two parts of the plastic fiber optic connectors with
a pair of pliers (no special tools are required). The connectors
are color-coded: Transmit - red; Receive - black.
Composite Fiber Optic Cable
Composite fiber optic cable combines a single strand of acrylic
fiber optic cable and two copper wire cables. It is used in applications
where repeater modules are needed. The composite cable carries
the fiber optic signal and a 24V supply to the repeater module.
Duplex Fiber Optic Cable
Duplex fiber optic cable consists of two parallel strands of acrylic
cable bonded together. It is often used when remote modules
are installed in a system; for example, in an operator station.
Single Strand Fiber Optic Cable
Single strand acrylic fiber optic cable is used inside drive enclosures.
These components are used with the acrylic fiber optic cable.
The flexible glass fiber optic cable ships with one standard ST
style connector installed. Glass fiber optic cable is used
for sending data over long distances. Glass cable is recommended
in cases where distances exceed 328 feet (100 meters) or installed
through high temperature areas.
Highlights
Ordering Information
Note: Glass Termination Kit (JA352597) is needed to
assemble the connectors for the glass fiber optic cable.
These isolators are DIN rail mounted devices that provide electrical
isolation between its input and output circuitry. Input can
be from 10mV to 100V or 1mA to 100mA. Output can either be
voltage (0-5V, 0-10V, ±5V or ±10V) or current (0-1mA, 0-20mA, or
4-20mA).
Highlights
-
Provides a fully isolated DC output in proportion to a DC input
-
Easy field configurable input and output ranges
-
Ultra slim 12.6mm (0.5“) housing mounts on DIN rail for high
density installation
The 5530 loadcell amplifier scales the high level output signal
from a strain gauge or LVDT loadcells for use as tension indication
or as a feedback signal for material tension control. The
force created by tension in the web is converted into a DC voltage
that is proportional to web tension and the supply voltage.
Highlights
-
–10 to +10 VDC output
-
Offset and span for calibration
-
Excite potentiometer for scaling the loadcell supply voltage
-
Adjustable bandwidth and filter
-
DIN rail mountable and wired to customer terminals
This potentiometer provides 0 10 10 volt dancer position feedback.
It is designed to be mounted on the machine to provide material
take-up control. The design eliminates dead spots common after extended
usage.
Highlights
-
NEMA 4 construction
-
300 Degree Travel
-
Heavy duty terminals
The L5231 measures light levels in both plastic and glass fiber
optic cable. This meter is invaluable during start-up to ensure
trouble-free communications.
Highlights
The 5703 allows peer-to-peer communication between 590+ or 690+
controllers over a fiber optic cable. It can access any readable
590+ or 690+ Series controller parameter, including speed, current
and feedback signals. It allows users to implement extremely accurate
draw or ratio schemes. One 5703 is required per drive when
digital master or follower capability is required.
Highlights
-
16-bit reference signal
-
Configuration for master/slave operation
-
Fully configurable input and output signals
-
Additional fiber optic transmitter
-
DIN rail mountable
A range of custom designed optional EMC (ElectroMagnetic Compatibility)
filters are available for use with the SSD Drives product range.
These have been carefully designed to provide cost effective and
easily implemented solutions for a variety of standard installations.
 Use
the link below to view (left click) or download (right mouse click
and "Save Target As") PDF file on this topic.
Click
here for "Other Accessories" PDF (139k) |
