The 690+ series is a single range of AC drives designed to meet the requirements
of all variable speed applications from simple, single-motor speed
control through to the most sophisticated, integrated multi-drive
systems. At the heart of the 690+ is a highly advanced, 32 bit microprocessor
based, motor control algorithm, to which can be added a host of control
options that allow you to tailor the drive to meet your exact requirements.
Configurable
It is possible to configure the 690Plus into 4 different operative modes:
Open Loop Control
The V/Hz mode is ideal for simple speed control. The 6901 Man Machine
interface is used for setting-up programming and controlling the drive.
It has been ergonomically designed with a back-lit, 32-character,Alphanumeric
display to provide intuitive access to all functions in a logical menu-driven
format.
Sensorless Vector control
The sensorless mode assures an elevated accuracy of speed control, thanks to the algorithm of MRAS (Model Reference Adaptive System) control.
This innovative design guaranties speed control (without any feedback) based on continuous motor-modeling.
Closed Loop Flux Vector control The Flux Vector Control is obtained by simply fitting the 690Plus with an encoder receiver Tech Box and encoder.
This guaranties 100% continuous control from zero speed, to satisfy most demanding applications.
Regenerative control The regenerative mode reuses the energy generated by the motor (during the deceleration of applicable load) in applications such as unwinds, test stands and other such applications.
Internal EMC filters [up to frame C]
Simple Set-Up and Programming
Removable Key Pad
Extremely Compact
Motor Thermistor Input
690+
Integrator Series Inverter
From 0.3 to 1600 Hp
(0.75 to 1000 kW)
Technical Specifications
Input Frequency
50-60Hz ±5%
Single Phase 220-240Vac ±10%
Three Phase 220-240Vac ±10%
Three Phase 380-460Vac ±10%
Three Phase 380-500Vac ±10%
Ambient Temperature
0-45°C (constant torque)
0-40°C (quadratic torque)
Overload
150% for 60 sec. (constant torque)
115% for 10 sec. (quadratic torque)
Output frequency 0-480Hz
Protection option IP20, IP40 (NEMA 1) and IP54 (NEMA 12)
INPUTS / OUTPUTS
Analog
inputs 4 total, configurable, 10bit ( 12bit available with System Board option) 0-10V, 0-±10V, 0-20mA, 4-20mA
Analog
Outputs 3 total, configurable, 10 bit 0-10V, 0-±10V, 0-20mA, 4-20mA
Digital Inputs 8 total, configurable, 24Vdc nominal(max 30Vdc)
Digital
Outputs 3 total, configurable Dry Contacts, max 3A a 230Vac
Available Reference Voltages +10Vdc
–10Vdc
+24Vdc
INTERNATIONAL CODES
The 690Plus complies to standard code when installed in accordance to manufacturers installation manual:
EN50178
(Protection, Low Voltage Directive)
EN50081-1
(1992)
(Emission per unit in ambient at 230 with EMC filter)
EN50081-2
(1992)
(Emission per unit in industrial environment at 400Vac with EMC filter)
EN50082-2
(1995)
(Immune in industrial EMC environment)
EN61800-3
(Standard EMC specifications per Drive)
EN61000-3-2
(Standard harmonics with line inductors)
Complies
With CE, UL and c-UL
Options
Communication Tech Box
ProfibusDP
Devicenet
CanOpen
LINK
LonWorks
EI Bisynch/RS422/RS485
Modbus RTU
Ethernet
Encoder Receiver Tech Box
Expansion 'System Board' with 5 Configurable digital inputs / outputs
Internal EMC filters [up to frame C]
