DC Drives


590Plus


514C


512C


506-7-8

 

 

 

Serie 590Plus

 

 

 

 

 


590+ Integrator Series
from 15 to 2700 amps

Description
The Integrator Series is a single family of both AC drives (690+) and DC drives (590+) that provides the benefits of common programming, set-up and communications across both technologies.

The 590+ Integrator series highly advanced DC drives meets the demands of the most complex motor control applications.

 Extensive application software (including winder control as standard) together with Function Block Programming and configurable I/O creates a total drive system in a single module.
 

Common programming, set-up and communications with 690+ AC Integrator Series

DRV Option with built-in contactor, fuses and blower starter

Systems Specification including open and closed loop winder control as standard

Ratings up to 2700A and supply voltages up to 660V

Function Block programming based

Internal controlled field supply


 

STANDARDS

The 590+ series meets the following standards when installed in accordance with the relevant product manuals.

marked to EN50178 (Safety, Low Voltage Directive)

EN61800-3 (EMC Compliance) with integral filters (590+ up to 110A require external supply capacitors for compliance)

listed to US & Canadian safety standards



 

 

View/Download
catalogue pages

 

TECHNICAL SPECIFICATION

Power Configuration
590+ Four Quadrant Regenerative; 2 Fully Controlled Three Phase Thyristor Bridges
591+ Two Quadrant Non-Regenerative; 1 Fully Controlled Three Phase Thyristor Bridge
Thyristor Controlled Variable Field Supply

Armature Current Ratings (Adc)
Frame 1 15, 23A
Frame 2 40, 70, 110, 165A
Frame 3 180, 270A
Frame 4 380, 500, 725, 830A
Frame 5 1580A
Frame H 1200, 1700, 2200, 2700A
DRV Version available Frame 1 and 2

Overload
15-450A; 200% for 10 seconds 150% for 30 seconds =700A;
Various overload options available

Armature Voltage
Varmature = Vac x 1.15

AC Supply Voltage (Vac) 50/60Hz
220-500V (±10%) Frame 1-5
110-220V (±10%) option Frame 1-5
500-600 (±10%) option Frame 4-5
500-690V (±10%) Frame H

Field Current
4A Frame 1
30A Frame 4 and 5
10A Frame 2 and 3
60A Frame H

Field Voltage
Vfield = Vac x 0.82

Ambient
Temperature 0-40șC (=1200A ratings)
0-45șC (15-165A ratings) Derate 1%/șC for higher
0-35șC (180-270A ratings) ambients to 55șC max

Altitude
500m ASL
Derate 1%/200m above 500m to 5000m max

 

PROTECTION

High Energy MOV's Heatsink Overtemperature
Instantaneous Overcurrent Thyristor Trigger Failure
Inverse Time Overcurrent Interline Snubber Network
Field Failure Zero Speed Detection
Speed Feedback Failure Standstill Logic
Motor Overtemperature Stall Protection
 

INPUTS/OUTPUTS

Analogue Inputs
(5 Total - 1 x 12 bit plus sign, 4 x 10 bit plus sign)
1 - Speed Demand Setpoint (-10/0/+10V)
4 - Configurable

Analogue Outputs
(3 Total - 10 bit)
1 - Armature Current Output (-10/0/+10V or 0-10V)
2 - Configurable

Digital Inputs
(9 Total - 24V, max 15mA)
1 - Program Stop
1 - Coast Stop
1 - External Trip
1 - Start/Run
5 - Configurable

Digital Outputs
(3 Total - 24V (max 30V) 100mA)
3 - Configurable

Reference Supplies
 1 - +10V dc
1 - -10V dc
1 - +24V dc
   
OPTIONS  
Programming/Control Module 6901
Remote mounting bezel and 3m lead 6052
Communications Options  
Profibus Technology Box 6055/PROF
Modbus/EI Bisynch/RS422/RS485 Technology Box 6055/EI00
Link Technology Box 6055/LINK
Devicenet Technology Box 6055/DNET
Tachogenerators switchable calibration board AH385870U001
Microtach feedback board - glass AH386025U001
AC Line Reactors (standard type)  
15A rating CO466448U015
35 and 50A rating CO466448U040
70A rating CO466448U070
110A rating CO466448U110
165A rating CO466448U165
180A rating CO055255
270A rating CO057960
380A rating CO0466709U038
500A rating CO0466709U050
725A rating CO0466709U073
830A rating CO0466709U083
1580A* rating 2 off CO0466709U050
1200A (500V) rating CO466250U012
1200A (690V) rating CO466250U012
1700A (500V) rating CO466250U017
1700A (690V) rating CO466250U017
2200A (500V) rating CO466250U022
2200A (500V) rating CO466250U022
2700A (500V) rating CO466250U027
2700A (690V) rating CO466250U027
*1580A rating
Load share choke for transformer supply		 CO466709U160
AC Line Reactors (for use with EMC filters)  
15A rating CO466449U015
15A rating CO466449U015
35 and 40A rating CO466449U040
70A rating CO466449U070
110A rating CO466449U110
165A rating CO466449U165
180A rating CO463039
Above 180A use the standard line reactor above  
EMC filters please refer to Catalogue Page  
Fuses please refer to Catalogue Page  
590Plus DRV DRV - A new concept in DC drive technology

The 590+ is available in either module, or alternatively "DRV" format up to 165A.

The DRV version includes all the peripheral power components associated with a DC drive system integrally fitted within the footprint area of the drive.

DRV options include the following integrally mounted within the drive:

AC line contactor
AC line fuses
DC fuses (regenerative versions)
Control/Field fuses
Motor blower starter
Auxiliary control transformer



© Copyright 2008 Parker SSD Drives. All rights reserved.
Legal Information